The Picosecond Laser Pen is one of the most popular skincare devices that assist in addressing different skin issues, such as hyperpigmentation, acne scarring, and tattoos. This device works by applying ultra-short pulses of laser energy to target and eliminate just the pigment particles in the skin to enhance the skin tone. The action of the laser is precise and therefore beneficial to the target tissue without affecting the other tissues adversely.
Picosecond Laser Pen: Understanding the Technology
The operation of the Picosecond Laser Pen is therefore based on ultra-short pulses which are used to transfer energy to the skin in a controlled manner. The picosecond laser is unlike the normal lasers that take nanoseconds to operate, and the picosecond laser has a shorter time to operate and this makes it easier to address the pigment particles. This makes it more efficient in the elimination of stubborn pigmentation and tattoos and at the same time reducing the side effects.
Skin Sensitivity Testing
Before using the Picosecond Laser Pen on a large area, it is also advised to do a skin sensitivity test. This is done by pointing the laser on a small area of the skin and observing the skin’s response the next day. If there is no inflammation, swelling, or rashing, then it is safe to go ahead with the complete treatment. This step also minimizes the possibility of an adverse reaction to the skin, especially for those who have sensitive skin.
Contraindications and Warnings
The Picosecond Laser Pen is not for everyone. Persons with some skin conditions such as infected skin, cuts, or severe acne should not use this device. Another thing that must be prevented is the use of the laser on newly tanned skin because this may cause skin burning or pigmentation. It is also necessary to avoid using the device if one is pregnant or if one has a history of skin cancer.
Setting Up the Device
Upon the first time that you receive your Picosecond Laser Pen, make sure that you follow these steps: In most cases, the package will contain the laser pen, the power adapter, the safety goggles, and the user manual. If the device is required before the first use then it is advised that the device is connected to a power source and charged.
Selecting the Right Mode and Power
Skin problems are of different types and as such they require different treatment modes as well as power levels. For instance, low power density is suitable for the face, while high power density may be needed for tattoo removal. Check the manual of the device to understand which mode you should select depending on the type of treatment that you need. Start with a lower power and first try to test the treatment on a small area of the skin.
Preparing the Treatment Area
Before using the Picosecond Laser Pen on the skin, the skin in the target area should be washed. A mild soap that may not harm the skin should be used and this should be done to wash the face to clean it from dirt, oil, or makeup. This is important because the laser has to penetrate the skin in the area of treatment and not be hindered by any form of dirt.
Labeling the Treatment Area
For instance, if one would like to remove tattoos or if one would like to treat a given pigmentation then it is preferable to draw a circle around it using a white pencil. It also assists in the right application of the treatment and you do not repeat the same area which is unhygienic and may cause skin discoloration.
Applying Numbing Cream (Optional)
For those who are sensitive to pain or for those who are treating a very sensitive area it is advisable to apply a numbing cream before using the laser pen. Use the cream as directed and let the skin be exposed to air for the required number of minutes before washing the cream. Another method that can also be used in minimizing the pain that is expected to be experienced during the treatment is the application of anesthetic cream.
Performing the Treatment
When ready to start, the laser pen should be parallel to the skin and should be almost in contact with the skin. This positioning enables the laser to home in on the pigment or the problem area without having to affect the skin in other ways such as causing inflammation or burning of the skin. Ensure that the treatment area is well-lit so that you will not have a problem with your vision.
Skin Disorders and Management (e.g. Pigmentation, tattoos, scars)
If for instance, you have some pigmentation spots, then you will require a few passes on the area of skin that has the problem. Some of the conditions such as tattoo removal or scars that are deep may take several sessions of the treatment. Some people have sensitive skin and as such, it is advised that the power level should be adjusted based on the level of the issue. Other treatments may be required to optimize the outcome as may be expected to be the case.
Aftercare
After the treatment, it is recommended that you apply a gel or aloe vera on the part of the body that you have treated. This aids in reducing skin inflammation and any initial redness that could be a result of the peel. Do not scratch the area where the laser treatment has been done as the skin will be sensitive.
Skin Care Products Recommended and Care Regime
Avoid using any scrubs, peels, or any other product that you think may harm your skin for the next few days. Do not use any product that has scrubs or any other products that may cause the skin to become sensitive such as products containing retinols. Make sure the skin is well moisturized and protected from UV light so that the healing process and the results of the treatment can be improved.
Frequency of Use
In case of mild pigmentation or skin renewal, the treatments can be performed after 2-4 weeks intervals. For severe procedures like tattoo elimination, the sessions could be arranged after every 6-8 weeks.
Conclusion
The Picosecond Laser Pen is a very useful device to enhance several skin problems such as pigmentation, scars, and tattoos. Thus, if you have followed the right procedure of setting it, the right way of using it, and the right way of handling it after use, you will be in a position to benefit from it.
FAQ’s
Q1: Is Picosecond Laser Pen Safe for All Skin Types?
The Picosecond Laser Pen is safe for most skin types but before using this pen, one should first try a patch test. People with dark skin complexion should also reduce the brightness so that they do not change their complexion.
Q2: How many sessions are required to achieve optimal results?
The duration that is taken to complete each session depends on the size of the area that is to be treated. Generally, in small areas, a single session may not take more than 20 minutes. In large areas such as tattoo removal the sessions may take 20-30 minutes or more.
Q3: Skin Problems Types Can Be Treated with the Help of the Picosecond Laser Pen?
Yes, the Picosecond Laser Pen can be used to treat several skin problems including, pigmentation, acne scars, and tattoos. However, it is recommended that when dealing with the problems, one should select the right settings on the machine that will not be detrimental to the skin.
Adelyn Cline Beauty Machine Manufacturer is Picosecond Laser Pen manufacturer, provide all types of Picosecond Laser Pen. If you look for Picosecond Laser Pen or microneedling dermapen, contact us via below form or directly send email to info@adelyncline.com